1. PARTS AND COMPONENTS
Fig. 1
1.
Fig. 2
2. Pusher
3. Top dosing lid
4. Screw conveyor
5. Filter
6. Juice jar
7.
Residue jar
8. Juice tank
9. Main body (Motor)
10. Cleaning brush
2. BEFORE USE
Take the product out of the box and remove all packaging materials.
Make sure all parts and accessories are present and in good conditions. If not, contact
immediately the Technical Support Service of Cecotec.
Clean thoroughly all the product's parts that come into contact with ingredients before
operating it for the first time.
3. PRODUCT ASSEMBLY
1.
Assemble the juice tank in the main body.
2. Place the filter inside the juice tank, making the arrow on the filter point at the juice tank's
arrow. Then, assemble the screw conveyor firmly inside the filter.
3. Assemble the pusher into the top dosing lid, then install the top dosing lid on the juice tank.
Fasten the top cover to the Lock mark to hold it firmly in place.
Fig. 3
Removing the rubber footing:
Fig. 4
Note: The juice tank is equipped with a rubber footing. Make sure the rubber footing is
connected to the juice tank before operating the device. Remove the rubber footing before
cleaning the device.
JUICE&LIVE 2500 EASYCLEAN
ENGLISH
25