General Use - Bell & Ross BR 05 Manual De Instrucciones

BR 05

GENERAL USE

BR-CAL.321/322 SELF-WINDING MOVEMENTS
Starting the watch
When the watch has stopped (crown in position 0): unscrew the crown (turn anticlockwise) to position 1. Wind
0 1
the movement by turning the crown clockwise. After approximately 40 rotations, the watch is fully wound (the
winding mechanism does not have a stop to prevent overwinding). The power reserve is approximately 40 hours
when fully wound. When the watch is worn , the automatic mechanism will wind the movement.
watch is set, to ensure perfect water resistance, screw the crown back into position 0. Never operate the crown
underwater. Power reserve. Bell & Ross watches have a power reserve of approximately 40 hours.
Setting the date
Quick setting
0 1 2
0 1 0 1
Crown in position 2: unscrew and pull
the crown out to position 2 and set the
0 1 2 3 date by turning the crown anticlockwise.
: as with all mechanical watches
NOTE
with a date function, quickset date set-
ting MUST NOT UNDER ANY CIRCUM-
STANCES be carried out between the
times of 9 PM (21.00) and 3 AM (3.00).
Setting the time
Models with date
0 1 2
0 1 2 3 0 1 2 3
Unscrew the crown then pull it out to
position 3. The seconds hand will stop,
enabling the time to be set to the near-
est second. Set the time by rotating the
crown in the required direction.
0 1
0 1 2
Slow setting
0 1 2 3
0 1 2 0 1 2
Crown in position 3: to ensure the date
changes at midnight rather than noon, it
is recommended to set the date by adjust-
0 1 2
ing the hands of the watch. Unscrew and
pull the crown out to position 3 and turn
the hands until the date changes. Then set
the precise time.
Models without date
0 1 2 0 1 2
Unscrew the crown then pull it out to
position 2. The seconds hand will stop,
enabling you to set the time to the near-
est second. Set the time by rotating the
crown in the required direction.
4
0 1 2
Seconds hand
Once the
NOTE :
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your watch. Also, we would recommend that you avoid placing your
watch near electronic devices that may generate large magnetic fields (radio, smartphone, television, computer, tablet, loudspeakers, etc.).
0 1 2
: The 4 slotted screws mount the bezel to the case and ensure the water resistance of the watch. To benefit from the Bell & Ross
NOTE
warranty, these screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and strap with fresh water. It is also recommended
to have the water resistance of your watch checked every two years.
BELL & ROSS INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be activated at the time of purchase by your approved Bell & Ross point
of sale, and presented every time an operation is performed. You can now access the digital version of this card and all the information
relating to your watch by scanning the QR code or visiting:
To ensure a service that meets the brand's exacting standards, any servicing of your watch must be carried out by the Bell & Ross service
centre or a watchmaker approved by Bell & Ross. The warranty does not, however, include:
. Any damage caused by accidents or by inappropriate or improper use of the watch (e.g. violent impacts, crushing, rough handling of
the clasp).
. Any damage caused by repair or disassembly operations carried out by a retailer or after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear and tear.
Minute hand
Hour hand
www.bellross.com/warranty
5
Date
Crown
Case attachment screws
(NEVER UNSCREW)
.