Elcometer MTG2 Guia Del Usuario página 13

12 SPARES & ACCESSORIES (continued)
Part Number
TXC1M00EP-2
TXC2M25CP-2
TXC2M25EP-2
TXC3M50EP-1
TXC5M00BP-4
TXC5M00EP-3
TXC5M00CP-4
†
TXC5M00CP-10
#
TXC5M00CP-8
TXC7M50BP-3
‡
TXC7M50CP-4
†
TXC7M50CP-6
TXC10M0BP-1
TXC10M0CP-4
Key
C/I = Cast Iron
G/F = Glass Fibre
G = Glass
†
Coating thickness, high damped transducer utilising ThruPaint™ technology. Suitable for use with
'Echo-Echo ThruPaint™' measurement mode only - see Section 4.6 'Selecting the Measurement Mode'
on page en-5.
#
High temperature transducer, suitable for measuring hot surfaces up to 343°C (650°F).
‡
Extra resolution transducer with increase near surface resolution, ideal for use on thin substrates.
Other transducers are available which can be connected to MTG
gauges using a transducer adaptor - see Section 12.4 'Transducer
Adaptor' on page en-15. For a complete list of transducers, visit
elcometerndt.com
www.elcometer.com
Frequency Diameter
1.0MHz 1/2"
2.25MHz 1/4"
2.25MHz 1/2"
3.5MHz 1/2"
5.0MHz 3/16"
5.0MHz 1/2"
5.0MHz 1/4"
5.0MHz 1/4"
5.0MHz 1/4"
7.5MHz 3/16"
7.5MHz 1/4"
7.5MHz 1/4"
10.0MHz 3/16"
10.0MHz 1/4"
P = Plastics
T/G = Thin Glass Fibre
A = Aluminium
Suitable for Measuring
C/I P T/P G/F T/G S
  
  
  
  








T/P = Thin Plastics
S = Steel
T = Titanium
R
G A T
 
 
 
 
 
  
  
  
  
  
en-12