Moulinex MASTERCHEF PRO Manual De Instrucciones página 42

Ocultar thumbs Ver también para MASTERCHEF PRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
EN
• Make sure the appliance is turned off. Set up the assembled vegetable chopper (G) tilted towards you,
facing the outlet (A7), hold the vegetable chopper at the bottom.
• Pivot the feed tube to the back until it stops. (fig. 6c)
• Place a large bowl or the blender bowl (B1) under the vegetable chopper to collect the ingredients.
Tips:
You can prepare up to 2 kg of food, maximum running time: 10 min
Grate: speed 8 to 10
• Use the grater drum (G5) to finely grate emmental, carrots, etc.
• Use the thick grater drum (G4) to grate julienne carrots, courgettes, cooked beetroot, etc.
Slice: speed 6 to 8
• Use the slicer drum (G3) to slice carrots, courgette, potatoes, etc.
Shred: speed 10 to 12
• Use the shredder drum (G6) to shred potatoes, parmesan, etc. into fine flakes
Starting up:
• Turn the speed selector (A1) to the desired speed.
• Wait a few seconds for the appliance to reach the desired speed.
• Add the pieces of fruit or vegetables through the feed tube on the cover (G1), pushing using the pusher
(G2).Never use your fingers, a spoon or any other utensil. (fig. 6d)
• To stop the appliance, return the speed selector (A1) to 0.
Dismantling the accessories:
• Wait for the appliance to be completely off.
• Pivot the feed tube to the front.
• Unlock the drum container from the outlet(A7).
• Unlock the drum latch (G7) depending on the model.
CLEANING
• Unplug the appliance.
• Completely remove the grinder head, juice extractor, vegetable chopper and blender bowl accessories.
Handle the blades with care to prevent injury.
• Wash, rinse and dry the accessories. They are all dishwasher safe, with the exception of all metal
components of the mixing and kneading accessories (C1), kneading hook (C2), balloon whisk (C3),
grinder head, body (F1), screw (F2), blade (F3), screens (F4 et F5), nut (F6), the juice extractor
waste container (H4).
• Never immerse the motor unit (A) in water or put it under running water. Wipe it with a dry or
slightly damp cloth.
• In the event any of your accessories are coloured by food (carrots, oranges, etc.), rub with a cloth soaked
in cooking oil and then clean them as usual.
• Blender (L or D): pour hot water into the blender and add a few drops of washing up liquid, close the
cover. Fit it on the appliance and give a few pulses. After removing it, rinse the bowl in running water
and allow to dry (blender upside down).
For cleaning more difficult residues, especially with thicker preparations, the removable blade assembly
can be detached from the blender To do so, once empty, turn the blender over on a flat surface, unscrew
the removable blade assembly a quarter of a turn and carefully remove the seal.
84
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
CAUSES
The appliance does
It is not plugged in.
not work.
An accessory is not positioned
correctly.
A message flashes "SAFE"
The products
Overload.
stops working in
the middle of an
A message flashes "STOP".
operation.
You have let your appliance
run too long (time over 16
minutes).
The programmed time has
elapsed.
A message flashes "END".
The blender blades
Pieces of food too large or too
do not rotate freely.
hard.
Leak at the bottom
The seal (D2) is not correctly
of the blender.
positioned.
The removable blade assembly
(D1) is not properly locked
Your juice extractor
The container (H4) is over-
attachment
loaded.
"vibrates".
The TIMER function
Your appliance is running.
does not work.
SOLUTIONS
Plug the appliance in using a plug with the
same voltage
Refer to section
"MESSAGE DISPLAY".
Make sure the safety covers (A5) and (A9)
or the safety cover (B2) and accessories are
correctly positioned and (or) assembled.
Refer to section
"MESSAGE DISPLAY".
Remove some of your ingredients...
Allow your appliance to cool down for a few
minutes.
Turn the speed selector (A1) back to 0.
Let your appliance cool down for a few
minutes, then start it back up again.
Reduce the size or quantity
of the ingredients
Add liquid.
Reposition the seal (L2) on the removable
blade assembly (L1) and lock it on the blender
jug (L3)
Empty the container (H4).
Refer to section 5.
To program an operating time, the appliance
must be stopped.
85
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Qa701h27

Tabla de contenido