Product Description - FAA EDC 01L Manual Del Usuario

EN
Translation of the original instructions

• PRODUCT DESCRIPTION

The Door Controller has been designed to control an access, by opening it and
controlling its status.
It controls the FAAC readers via the Spinet Bus and also has 2 ports for Magnetic
Stripe or Wiegand readers. It must be connected to the Network Controller via
the RS485 line or the LAN, depending on the model ordered.
RS485 Model
Memory:
The RS485 Door Controller control
unit allows up to 10000 cards to be
stored in the Flash memory and clock
module with a lithium backup battery
(mod. CR2032) and up to 100 Profiles
(depending on the configuration set
in the Keydom software).
Door Controller
LAN model
Memory:
The LAN Door Controller control unit
allows up to 50000 cards to be stored
in the Flash memory and clock mo-
dule with a lithium backup battery
(mod. CR2032) and up to 100 Profiles
(depending on the configuration set
in the Keydom software).
16 532226 - Rev. D