Open a browser such as Chrome or Firefox on a computer to access this function.
The PC must obviously belong to the same LAN network class as the Door
Controller.
Enter the default IP address of the Door Controller in the address bar:
http://192.168.1.240
Authentication is required for security reasons.
A window therefore appears in which you can enter the User Name and the
associated Password.
The User Name and Password can be customised.
The ones used when the Door Controller is shipped from the factory are:
Default user
Default password
The following can be modified via the web interface:
1. Enable or disable DHCP
2. IP address
3. Subnet Mask
4. Gateway
5. Communication port
6. Http Port
7. Bus Address (Door Controller identification number)
8. Web interface User Name and access Password.
Door Controller
Translation of the original instructions
19
admin
admin
532226 - Rev.D
EN