Before Initial Use - Game ready ATX CRYO CAP Manual Del Usuario

BEFORE INITIAL USE

Prime the Wrap using the following steps:
• With the GRPro 2.1 Control Unit
off, attach the Connector Hose to
the Control Unit and the Wrap
• Lay the Wrap open and flat next to
the Control Unit (not on the body)
• Turn the System on and run for 2
minutes with No Pressure
CRYO CAP APPLICATION
Place the Cryo Cap on the top of the head and
1
adjust the hook and loop closure at the front of the
cap for a comfortable fit.
To secure the chin strap, fasten the hook and loop
3
closure. The cupped point of the chin strap should
be in-line with the center of the chin. The chin strap
should not be worn on the neck.
Connect the other end of the Connector Hose into the
5
Control Unit. To disconnect, simply press the blue or
gray button and remove the connector from the Wrap.
Insert each end of the chin strap into the ear loops
2
and pull down on the tabs to tighten the chin cup
comfortably.
Attach one end of the Connector Hose to the
4
Connector Port on the Wrap by firmly inserting the
two pieces straight into each other. There should be an
audible "click" .