INSTRUCTIONS FOR USE
Read all warnings and cautions completely before use.
Recommended treatment time is 20-minutes; consult
your healthcare professional for a treatment cycle that
best suits your injury. Discontinue use immediately if
treatment is uncomfortable or painful.
1.
Treatment area should be clean before applying the control unit.
Note that excessive skin lotion or soap residue may affect the
adhesiveness of the pad. Only use on HEALTHY skin areas with
no cuts, sores or wounds.
2.
Apply the pads to the desired treatment area, taking care to
ensure the controller is comfortably within reach of your hand
for safety and control during treatment.
3.
Ensure the electrode pads are smoothly applied and the gel
adhesive is holding the pad firmly in place on the skin.
4.
The power switch is located at the top of the control unit;
slide the switch to the on position and the digital display will
illuminate.
20 • ENGLISH
On/Off Switch