Temporary Decommissioning; Technical Data; 22 8.2 Dimensions And Weights - Sicam JUMBO TCS26 Manual Original

en 34 | JUMBO TCS26 | Decommissioning
7. Decommissioning
7.1 Place change
Procedure:
1. Disconnect electrical connection.
2. Follow what shown for first start up (see chap. 4.2).
i
In case of sale or transfer of JUMBO TCS26, all the
documents included in the consignment volume
has to be integrally handed over together with the
equipment.
7.2

Temporary decommissioning

If the JUMBO TCS26 is going to be stopped for a limi-
ted period of time or if the equipment is not being used
for other reasons, always disconnect the network plug
from its socket!
It is suggested to clean accurately the JUMBO TCS26,
also its tools and accessories, and carry out a protec-
tion treatment (e.g. spraying of a thin oil film).
7.3 Disposal
¶
Disconnect the JUMBO TCS26 from the mains ten-
sion and take off the power supply cable.
¶
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
¶
Disassemble the JUMBO TCS26, order the materials
according to the category it belongs to and dispose
of them according to the rules in force.
JUMBO TCS26 complies to the rules of the
European directive 2002/96/CE (directive
on the disposal of electrical and electronic
waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
¶
For disposal of such products, use the
available return and collection systems.
¶
The correct disposal of the JUMBO TCS26
makes it possible to avoid environmental
damage and to put at no risk the life of
people.
|
1 695 400 376 2013-04-17
8.

Technical data

8.1 JUMBO TCS26
Function
Maximum noise level
Working hydraulic pressure
Power supply tension
8.2 Dimensions and weights
Function
JUMBO TCS26 (A x L x P)
Net weight
Gross weight
8.3 Reach
Function
Tire width
Maximum tire diameter
Maximum tire width
Specifications
75 dB
20 – 130 bar
depending on the cho-
sen tension (see iden-
tification plate)
Specifications
1240 x 1640 x 1400 mm
593 kg
720 kg
min / max
14"– 26"
1640 mm
800 mm
Sicam srl società unipersonale