Owlet OSS1B Manual Del Usuario página 5

Base Station Status
1: Slow pulsing green light:
2: Blinking green light: Getting first heart rate and oxygen readings
1
Base Station Alerts
1: Blue flashing light:
The Smart Sock is disconnected from the Base Station
2: Yellow flashing light: The Smart Sock fell off or is poorly placed,
or shifted from proper placement
3: Red flashing light: Heart rate or oxygen levels are outside
specified limits
1
Dim Base Station Light
Press and hold to adjust brightness.
There is a brighter light for daytime use
and a dimmer light for nighttime use.
Heart rate and oxygen levels look good
2
Power Off Sock Electronics
Place the bottom flat surface of the Sock Electronics against the
center of the Owlet Base Station until red light inside the Sock
Electronics stops flashing. Turn on Sock Electronics by plugging
them into Base Station.
2
Charging
When the Smart Sock is charging, it will blink green. When
it is fully charged, it will have a solid green light. The Base
Station will glow cool-white when the Smart Sock is charging.
3
Turn Off Alerts
Press and release to turn off
monitoring. The Base Station will
beep, and it's light will turn off.
| 4