Technical Data - LaserLiner SuperSquare-Laser Manual De Instrucciones

Technical Data

Angle accuracy of the laser lines
Precision of the vertical laser lines
Operating range (depending on room
illumination)
Power supply
laser wavelength
Laser class
Weight
Operating temperature
Storage temperature
Order number
Subject to technical changes
!
Regularly check the calibration before use, after transport
and after extended periods of storage.
Checking the vertical line:
4
Fix a plumb bob with a line at least 2.5 m in length on the wall,
making sure that the bob can swing freely. Align the spirit levels,
turn on the unit, adjust the lines to the plumb and the spirit-levels
(2) with the levelling feet (6, 7). The precision is within tolerance if
the deviation between the laser line and plumb line is not greater
than 0.5 mm / 1 m.
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
SuperSquare-Laser
± 0,05°
± 0,5 mm / 1 m
20 m
2 x 1,5V AA / 24 h
635 nm
2 / < 1 mW
0,4 kg
0 °C ... + 50 °C
-10 °C ... + 70 °C
081.130A
10/2010
07
GB