Installation Of Programming Connections - Lutron Electronics Energi Savr Node Manual De Instrucciones

English Español
Energi Savr Node
Installation of programming connection
WARNING! Danger of Shock. May result in serious injury or death. DO NOT WIRE WHEN LIVE! Switch off power via circuit
breaker before wiring or servicing the Energi Savr NodeT with EcoSystemR unit.
Buttons and LEDs on the front of the unit are used for troubleshooting. If wiring is exposed when accessing buttons and
LEDs, the unit must be accessed by a certified electrician, following local codes.
• Wireless router only required for programming with an Apple iPod touch or iPhone mobile digital devices.
• Wireless router may be removed for normal operation.
• Ethernet connection may be made via integral Ethernet jack.
• Lutron recommends that an Energi Savr NodeT with EcoSystemR unit be wired to an Ethernet jack in the space for ease of access
and proximity to power for the wireless router.
• Works with any standard wireless router that supports multicast packets.
• Apple iPod touch or iPhone mobile digital devices can program other Energi Savr NodeT with EcoSystemR units connected to an
Energi Savr NodeT with EcoSystemR unit via the QS Link (except when part of a Quantum
• Energi Savr app is required and is available from the Apple iTunes Store online marketplace.
Recommended: Install Wall Jack for Commissioning
Easily accessible Ethernet wall jack installed in the area which has the lights
Energi Savr NodeT with
EcoSystemR unit
1
QS Link
* Note: Energi Savr NodeT with EcoSystemR units are not designed to exist on an open network. Connection to an open network could result in reduced
performance and Ethernet connectivity issues.
If ethernet wall jack is not installed, turn power off to Energi Savr NodeT with EcoSystemR unit before connecting
ethernet cable.
Apple, iPhone, iPod touch, and iTunes Store are trademarks of Apple Inc., registered in the U.S. and other countries.
International Energi Savr Node
English
Français Português
with EcoSystemR
TM
2
Dedicated
2
Ethernet
Connection for
Energi Savr
NodeT with
EcoSystemR
QSM
units*
with EcoSystemR Installation Guide
TM
Italiano
|
Installation Guide
Apple
iPod touch
or iPhone
mobile
Wireless
digital
Router
device
(by others)
QS Link
Deutsch
system).
®
Wire types:
Less than 153 m: LutronR cable
1
GRX-CBL-346S
153 m to 610 m: LutronR cable
GRX-CBL-46L
Standard CAT5/CAT5E cable:
2
Total length not to exceed 100 m
1
中文
Lutron 9
|
®