Intended Use; Identification Plate; Operating Elements; Putting Into Use - MTD CSH40 Manual De Instrucciones

EN

Intended use

This tool is intended solely
- with the authorised original saw chains and guide
bars for sawing wood
- for use in accordance with the descriptions and
safety information given in this instruction manual.
The chainsaw is not designed for commercial use
and may only be used at home and in the garden.
Any other use is classed as improper use.
The user is liable for any damage arising from
improper use.

Identification plate

Position
The identification plate is located on the casing of
the tool.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Layout
1
13
12
11
1 Manufacturer
2 Weight
3 Power
4 CE mark
5 Guaranteed sound level
6 Year of manufacture
7 Protection class
8 Disposal instruction
9 Motor rotation speed in rpm
10 Rated voltage, current type
11 Model number
12 Serial number
13 Model name
30
2 3 4 5
10 7
9 8

Operating elements

Operating elements R
1 Power pack
2 Cutting bar
3 Saw chain
4 Bumper spikes
5 Handle
6 Adjusting wheel
7 Locking screw
8 Lock-on switch
9 On/off switch on handle
10 Oil tank cap
11 Oil fill level indicator
12 Protective cover
13 Bow-shaped handle
14 Hand guard with chain brake function
Supplementary documentation
Make sure the operating manuals of the
40V FAST CHARGER and the 40V LI-ION
power pack are available. Please read
and understand them before putting the
device into use.
Power pack charging
6
Risk of injuries or material damage
¾ Only charge the power pack with the 40V
FAST CHARGER.
The power pack is supplied partially charged. Be-
fore first use, fully charge the power pack using the
40 V FAST CHARGER to ensure the full capacity
of the power pack.
Power pack charging must be carried out ac-
Î
cording to the instructions in the supplementary
documentation.

Putting into use

WARNING!
Attention!
Intended use