Setting The Hard Stops - Manfrotto MVA511FF Manual

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43

SETTING THE HARD STOPS

Reference points for the maximum and minimum focal distances can be marked on the marking
disc . Hard stops allow the operator to set mechanical limits for lenses without them .
To set the focal distances (see fig . 6):
Rotate the handwheel to find the start focal point . Mark this point on the marking disc "A" .
Rotate the handwheel and establish the end stop point of the focus pull . Mark this point on
the marking disc "B" .
Press the index/witness marker button and move to align with the marked end stop point "C" .
Press the second limit stop button and move just beyond the marked start focal point "D" .
Rotate the handwheel so that the hard stop slider button is between the start focal point and
the end stop point . Engage the hard stop slider button "E" .
GB
Fig. 6
Setting the hard stops
10

Publicidad

Tabla de contenido
loading

Tabla de contenido