Maintenance; Cleaning - Manfrotto MVA511FF Manual

MAINTENANCE

CLEANING

During indoor use, the only cleaning required should be a regular wipe over with a lint-free cloth .
Dirt accumulated during storage may be removed using a semi-stiff brush or vacuum cleaner .
Particular attention should be paid to the lower support rod bridge, the double-sided gear drive
spindle and the end stop bezels .
The marking disc must be removed from the Manfrotto Follow Focus before cleaning . Follow the
instructions supplied with the marking pen when cleaning the marking discs .
CAUTION! Do NOT use solvent or oil-based cleaners, abrasives or wire brushes to
remove accumulations of dirt, as these damage the protective surfaces.
Use only detergent-based cleaners.
Use out-of-doors under adverse conditions will require special attention . Salt spray should be
washed off with fresh clean water at the earliest opportunity . Sand and dirt acts as an abrasive
and should be removed using a semi-stiff brush or vacuum cleaner .
GB
12