KTM Power Parts 62612027050 Manual De Instrucciones página 4

4
1
2
Scope of supply
1x 990 SM back plate
2x rear distance bushing
2x front distance bushing
2x flat-head screw-M8x55
2x flat-head screw-M8x60
Remove the left and right grips. Insert the rear distance bushing (short)
(1) and the front distance bushing (long) (2).
Put the back plate in place and mount with the M8x55 flat head screws
(rear) and the M8x60 flat-head screws (front).
NOTE: When removing the seat, first carefully push the rear end under the
topcase carrier plate. Then pull the seat away at the front end. This
prevents damage.
0991080603