Silva ADC SUMMIT Manual De Instrucciones página 51

14.5 Altimeter Mode -
Altitude
Undesirable Range
preset
altitude
level
Desirable Range
0
The Altitude Alarm
Altitude Alarm
Altitude Alarm
!
The ADC is equipped with an altitude alarm.
!
That alarm alerts user when the current
altitude is equal to or higher than the preset
'beep'
altitude level.
for 5
seconds
!
Check the 'Setting the Altimeter Mode'
(every 2
section below for more detail on how to set
minutes)
the altitude level for the alarm.
Altitude Alarm Sound
!
In Altitude Mode: When the current altitude is
equal to or higher than the preset altitude
level, the ADC starts beeping for about 5
Time
seconds.
!
After the first beeping, the ADC will beep
again for every 2 minutes if the current is still
equal or higher than the preset value.
!
The repeated alarm beeps will stop until the
altitude is equal or higher than the preset
value or the Altitude Alarm is set to OFF.