Control Panel - Zanussi ZDT431 Manual De Instrucciones

• A qualified and competent person must do the electri-
cal installation.
• A qualified and competent person must do the plumb-
ing installation.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,

Control panel

1 On/off button
2 Digital display
3 Programme selection buttons
4 Multitab button
5 Delay start button
6 Indicator lights
7 Function buttons
1)
1)
20
All manuals and user guides at all-guides.com
1
A
Indicator lights
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
2 3 4 5
B C
7
The indicator light comes on when it is necessary to fill
the salt container. Refer to the chapter 'Use of dishwasher
salt'.
The salt indicator light can stay on for some hours, but
it does not have an unwanted effect on the operation of
the appliance.
The indicator light comes on when it is necessary to fill
the rinse aid. Refer to the chapter 'Use of rinse aid'.
6