Black and Decker LST201 Manual De Instrucciones página 40

40 • ENGLISH
tablespoon of water.
3. Plastic parts can be cleaned using mild soap and a
damp cloth.
4. The line cutter on the end of the guard can become
dull over time. We recommend periodical maintenance
of the blade's edge with a file.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Warning! The use of accessories not recommended by
BLACK & DECKER for this tool can be dangerous.
Use the BLACK & DECKER model AF-100 replacement
spool. Replace the nylon line (package or pre-coiled
replacement spool) as shown in this manual.
f Use only 0,065" (1,65 mm) diameter monofilament
lines. Do not use serrated or heavier gauge lines
because they could overload the motor and cause
overheating. The unit only works properly with 0,065"
(1,65 mm) diameter monofilament nylon line. You
can get this line through your local dealer or
authorized service center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.
TECHNICAL DATA
TRIMMER/EDGER
Voltage
.../min
Speed
(rpm)
in
Cut swath
(mm)
in
Line size
(mm)
Line Feed System
kg
Weight
(lbs)
CHARGER
TIPO
Input voltage V
Frequency Hz
Input current mA
Output voltage V
Output current mA
Charge time hr
BATTERY
Voltage
Capacity Ah
Type
* Maximum initial battery pack voltage (Measured without
a workload) is 20 volts. Measured under a workload,
nominal voltage is 18V.
LST201
20 V MAX*
9000
10 (254)
0,065 (1,65)
AFS
2,04 (4,5)
AR B2C B3
100- 100-
220
240V 240V
50/60
300
8 - 20
400
3,5 - 4
20 V MAX*
1,5
Ion de Litio
BR
100-
240V