Set-Point Temperature Range - Airzone AZXCSMASTER Manual De Instalación Y Usuario

In case of to be connected to an AZXCCPC, Available modes will depend of installation type
configured in that element.
Aerothermal
Keep in mind that when you choose any mode of Heat air-conditioning, the systems you are
connected with will change to the same Heat mode or the available mode if the others are not.
This point applies to all imposition modes.
To set up the imposition mode of the SuperMaster Controller, you must access the configuration
mode and select the desired mode. By default, the Forced Mode is the one imposed. To be
modified, follow these steps:

3.4.2. Set-point temperature range

The SuperMaster controller allows configuring the set-point temperatures range for both cooling
and heating mode. To do this, do as follows (Fig. 8):
1) Access the configuration menu from user mode by long press on
2) Use the selection arrows up or down
3) Press on
4) Use the selection arrows
showing the screen
Installation type
2 Pipes
3-4 Pipes
to confirm the access.
up or down to select

again.
Available mode
Forced
Semi-forced
Forced
Semi-forced
Forced
Semi-forced

Free
Fig. 7


until you see

Fig. 8













.
on the screen.
and press to confirm on ,
29