Time Programming Available - Airzone AZXCSMASTER Manual De Instalación Y Usuario

5.3. Time programming available

The programs based on the AT-Home SuperMaster Controller, either for the Air-conditioning
Mode or for the Set-point Temperature, have the ability to program single week days, the group
of weekdays, the group of weekends or the group of the whole week.
These programs depend on the priority rules as shown below:
This means that a program for Monday will have priority over another program for the weekdays
or for the whole week.
As there are four time programming, their timing can overlap. When this happens, the higher
priority program will be the first and the least priority the fourth.
Note: Priority among days and group days are exclusive, that is, if there is a time programming for Monday, no
other time programming belonging to other group will be executed. This differs from priorities among the four time
programs in the same day or group. In that case, priorities are taken into account.
Note: Time programming will take effect only if the time is within the configured time interval, otherwise it will have
no effect. For example, if the program is configured from 10:00 to 19:00, out of this period, time programming will
have no effect.
34
Fig. 14
Individual days
Labour days
Weekends
Whole week
Higher priority
Lower priority