Assemble And Connection; Assemble - Airzone AZXCSMASTER Manual De Instalación Y Usuario

3.2. Assemble and connection

3.2.1. Assemble

SuperMaster controller is available in wall-mounted (Fig. 1) or wall-embedded (Fig. 2) assemble.
To fit it, do as follow:
 Separate wall-support from thermostat.
 Fix wall-support either directly on the wall or on a wall-embedded mechanism box
pulling out the cable through the hole designed for it.
 Mount on the wall support the back protection case of the controller pulling out the
cable through the hole designed for it.
 Once connection is done, assemble display on the back protection case (Fig. 1).
Embedded SuperMaster controller is designed for a screwed wall-embedded box of size
100x100. Compatible brands are:
- Solera 362 (100x100 mm)
- Jangar 2174 (100x100 mm)
- IDE CT110 (100x100 mm)
- Fematel CT35 (100x100 mm)
Note: Dry-wall embedded boxes are not compatible with embedded controller from Airzone.
To fit a wall-embedded controller (Fig. 2) do as follows:
 Remove the trim-frame of the set.
 After connecting the wire, use the washer and screws to fit it to the wall-embedded box.
 Place trim-frame ensuring that it is correctly fit.
Fig. 1 Fig. 2
25