Preparation; Initial Assembly Instructions - allen+roth LP7942LBZ Manual Del Usuario

SAFETY INFORMATION
To reduce the risk of re, electric shock, or personal injury, do not bend the blade arms when
installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between the
rotating fan blades. Mount the fan to an outlet box marked "ACCEPTABLE FOR FAN SUPPORT"
and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the
support of lighting xtures are not acceptable for fan support and may need to be replaced. Consult
a quali ed electrician if in doubt.
result in damage to the ceiling fan's remote control unit.
This fan is to be used in dry locations only.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips screwdriver, 1/4 in. athead screwdriver, wire
strippers and step ladder
Helpful Tools (not included): AC tester light, do-it-yourself wiring handbook and wire cutters

INITIAL ASSEMBLY INSTRUCTIONS

1. Loosen the preassembled hanger ball set screw (FF)
until the hanger ball falls freely down the downrod
(C). Remove the preassembled hanger ball pin (GG)
from the downrod (C) and remove the hanger ball
portion of the downrod (C). Retain the hanger ball pin
(GG) and hanger ball for later.
Hardware Used
Hanger Ball Set
FF
Screw
GG Hanger Ball Pin
1
x 1
x 1
6
GG
C
Lowes.com/allenandroth
FF