Trouble Shooting; Disposal / Recycling Of Materials; Nameplate - Sunrise Medical QUICKIE Easy Max Manual De Usuario

Ocultar thumbs Ver también para QUICKIE Easy Max:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 103

9.0 Trouble shooting

Wheelchair pulls to one side
• Check tyre pressure
• Check to make sure wheel turns easily (bearings,
axle)
• Check the castor angle
• Check to make sure both casters are making proper contact
with the ground
Casters begin to wobble
• Check the castor angle
• Check to make sure all bolts are secure;
tighten if necessary (see the section on torque)
• Check to make sure both casters are making proper contact
with the ground
Wheelchair / Cross-tube assembly does not snap into
position in the seat saddle
• Chair is still new, i.e., the seat or
backrest upholstery is still very stiff. This will improve with time
Wheelchair is difficult to fold up
• Adjustable backrest upholstery is too stiff. Loosen
it accordingly.
Wheelchair squeaks and rattles
• Check to make sure all bolts are secure;
tighten if necessary (see the section on torque)
• Apply small amount of lubrication to spots where movable parts
come in contact with one another
Wheelchair begins to wobble
• Check angle at which castors are set
• Check tyre pressure
• Check to see if rear wheels are adjusted differently

10.0 Disposal / Recycling of Materials

NOTE: If the wheelchair has been made available to you as part
of a charity or medical loans scheme, then it may not belong to
you. If it is no longer required, then follow the instructions to
return it as given by the organisation that made the wheelchair
available to you.
In the following section, there is a description of the materials
used on the wheelchair, in view of the disposal or recycling of
the wheelchair and its packaging.
There may also be special local regulations in force with regard
to disposal or recycling, these must be taken into account when
disposing of your wheelchair. (This can include the cleaning or
decontamination of the wheelchair prior to disposal).
Aluminium: Castor forks, wheels, sideguards for the chassis,
armrest frame, footrest, push handles
Steel: Fixing points, quick-release axle
Plastic: Handles, tube stoppers, castors, footplates, armpads
and 12" wheel/tyre
Packaging: Plastic bags made of soft polyethylene, cardboard
Upholstery: Woven polyester with PVC coatings and expanded
combustion modified foam.
Disposal or recycling should be done through a licensed agent
or authorised place of disposal. Alternatively your wheelchair
may be returned to your dealer for disposal.
Rev.E

11.0 Nameplate

The nameplate is located on either the cross-tube assembly or
the transverse frame tube, as well as on a label in the owner's
manual. The nameplate indicates the exact model designation
and other technical specifications. Please provide the following
pieces of information when ever you have to order replacement
parts or to file a claim:
SAMPLE
Sunrise Medical GmbH
Kahlbachring 2-4
D-69254 Malsch / Germany
Rollstuhl
TYPE:
Easy Max
ISO 7176-19:2008
kg
120 kg
max 10°
360 mm
Easy Max
Product Name/SKU Number.
Maximum safe slope with anti-tip tubes
fitted, Depends on wheelchair setting,
posture and physical capabilities of the user.
max X°
Seat width.
XXX mm
Seat depth.
XXX mm
Load Maximum.
kg
XXX kg
CE Mark.
User's Guide.
XXXX-XX-XX
Date of manufacture.
Serial number.
This symbol means Medical Device.
Manufacturer's address.
Crash tested according to
ISO 7176-19:2008
ISO 7176-19:2008.
2021-04-20
203211332922344
380 mm
EASY MAX
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sopur easy max

Tabla de contenido