Remote Control Unit - Denon AVR-1404 Instrucciones De Operación

ENGLISH
Setting the Digital In Assignment
Input the type of components connected to the digital input terminals.
1
Use the
to the COAXIAL input (COAXIAL) terminal.
9 COAX DVD
• Select "OFF" if nothing is connected.
Press the ENTER or
2
Use the
to the OPTICAL input (OPT) terminal.
10 OPT TV
• Select "OFF" if nothing is connected.
Press the ENTER or
from the beginning.
NOTE: TUNER cannot be selected.
After setting up the system
1
Press the SYSTEM SETUP button to finish system set up.
This completes the system setup operations. Once the system is set up, there is no need to make the
settings again unless other components or speakers are connected to or the speaker layout is changed.
12
(left) and (right) buttons to assign the input function connected
(Initial)
CD DVD TV VCR V.AUX CDR
(left) button (right) button
(down) button to switch the optical input (OPT) setting.
(left) and (right) buttons to assign the input function connected
(Initial)
CD DVD TV VCR V.AUX CDR
(left) button (right) button
(down) button if you want to start the settings over
11

REMOTE CONTROL UNIT

Operating DENON audio components
• Turn on the power of the different components before operating them.
1
Set mode switch 1 to "AUDIO".
OFF
2
Set mode switch 2 to the position for the component to be
operated. (CD, CDR/MD or Tape deck)
3
Operate the audio component.
OFF
• For details, refer to the component's operating instructions.
While this remote control is compatible with a wide range of infrared controlled components, some
models of components may not be operated with this remote control.
1. CD player (CD) and CD recorder and MD
recorder (CDR/MD) system buttons
6, 7 : Manual search
(reverse and forward)
2 : Stop
1 : Play
8, 9 : Auto search (Cue)
3 : Pause
DISC SKIP +: Switch discs
(for CD changers only)
3. Tuner system buttons
NOTE: TUNER can be operated when the switch is at "AUDIO" position.
3
1 2
3
2. Tape deck (TAPE) system buttons
6 : Rewind
7 : Fast forward
2 : Stop
1 : Forward play
0 : Reverse play
A/B : Switch between sides A and B
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel (up/down)
TUNING +, – : Frequency (up/down)
BAND : Switch between AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory