OPERATING INSTRUCTION
EN
DRIP-COFFEE MACHINE WITH GRINDER KA500
GENERAL DESCRIPTION
1. Tiltable cover
a. Lock
2. Water tank
3. Water level gauge
4. Body
5. Heating panel
6. Jug
7. Control panel
a. LCD display
b. Programming
c. Time settings
d. Setting minutes
e. Coffee beans
f. Ground coffee
8. Brewing unit with grinder
a. Grinder
b. Coffee container
c. Filter
TECHNICAL DATA
- Power: 1050W
- Supply voltage: 230V ~50Hz
- Capacity: 10 cups, 1,2 l
- Ground coffee: 60g
INSTRUCTIONS OF USE
- Place the coffee machine on a flat and stable surface and connect the plug to a power outlet
with the parameters specified in the manual.
- Before the first use, pour water into the tank (2) and switch on the device without adding
coffee – it will be rinsed out.
CAUTION: During operation, a small amount of water vapor may escape from the
machine.
Warning: Do not open the cover (1) when the device is in the operating mode, as this may
cause danger. Opening the cover (1) during operation will interrupt operation.
- Then remove the jug (6) and the brewing unit (8) and wash them thoroughly (see CLEANING
AND MAINTANANCE).
10 EN
7a
Prog
7b
HR
7c
MIN
7d
8a
8b
7e
7f
8
7
6
1a
1
2
3
4
5
8c