GRAPHITE 58G791 Instrucciones De Uso página 11

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
Use ear protection when operating the screwdriver. Noise hazards may cause hearing loss.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Electric screwdriver is a hand-operated power tool with insulation class II. It is driven by single-phase
commutator motor with rotational speed reduced with gear transmission. Power tools of this type are
widely used for screwing and unscrewing screws, making holes in wood and wood-like materials. Range
of use covers repair and building works, woodworking and any work from the scope of individual, amateur
activities (tinkering). Screwdriver can be used with various sockets, driver bits of various lengths with
hexagonal 1/4" shanks. Although the tool is designed mainly as a screwdriver, it can also be used with drills
with hexagonal 1/4'' shanks for light-duty drilling tasks (e.g. making pilot holes).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Holder
2. Ring for drill depth control
3. Screwdriver body hook
4. Switch lock button
5. Switch button
6. Direction selector switch
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Magnetic bit holder
2. Driver bits
3. Transport case
SWITCHING ON / SWITCHING OFF
The mains voltage must match the voltage on the label of the screwdriver.
ELECTRIC SCREWDRIVER
58G791
DETAILED SAFETY REGULATIONS
- 1 pce
- 5 pcs
- 1 pce
OPERATION / SETTINGS
11