Publicidad
Idiomas disponibles
Idiomas disponibles
While washing by hand, water should be clear enough for you to see the knives easily.
Do not use firm or abrasive cleaning materials.
Disassemble of the appliance
1. Unplug the main plug.
2. Take out the motor unit.
3. Rotate the actuator's lid anticlockwise and take out.
4. Take out the reservoir's lid.
5. Take out the cutting blade from the reservoir carefully.
How to clean properly
1. If necessary, wipe the motor unit and power cable with a wet rag. Wait for motor unit
to dry before using it again.
2. Wash all accessories by hand except motor unit.
3. Wait for all pieces to dry before using the appliance again or put it away.
Some Cleaning Tips
• To prevent foods from drying, clean the appliance as soon as possible after using.
• After using salty or acidic foods, dry the cutting blade carefully.
Storage
Keep the appliance away from children.
In order to avoid accidents, main plug shouldn't be plugged into while keeping it away.
• Keep the appliance away from high temperature and moisture.
Troubleshooting
If the appliance isn't working properly, please try to check the control list and fix the
problem on your own.
Do not try to fix the appliance in any condition on your own.
Defect
Probable causes/Action
It isn't working
Is the appliance connected to the power supply?
Check the connection.
Is the top corner of the actuator's lid clean?
Cutting blade doesn't rotate or it rotates hard.
• Turn it off immediately, unplug the main plug and check it. :
-Is there a blockage on the reservoir?
-Is the food too solid?
-Is the appliance assembled properly?
Is the reservoir watered due to the solid food?
• It is normal and doesn't affect working.
- 13 -
Publicidad
