How To Prevent/Avoid Corrosion; Daily Maintenance; Disposal Of Gh Positioning Lock, Including Batteries; Service And Lifetime - Guldmann 557600 Manual Del Usuario

4 .03

How to prevent/avoid corrosion?

When the products are mainly used in an corrosive environment,
e.g. swimming pool, the products must be ordered with a special
corrosion-preventive surface treatment.
4 .04

Daily maintenance

Ensure that the GH Positioning Lock is intact. Do not use the GH
Positioning Lock if it is damaged or defective. Instead, contact the
Guldmann Service Team or a technician certified in accordance
with Guldmann's indications.
4 .05

Disposal of GH Positioning lock, including batteries

Local and national regulations on environmentally correct
recycling must be observed.
Batteries (type NiMH) must always be delivered to an approved
recycling point.
5 .00

Service and lifetime

5 .01

Lifetime

The products have an expected lifetime of 15 years, on the con-
dition of correct use and correct service inspections, see section
5.02.
Replacement of components
Replacement of batteries, PCBs and lifting straps must be perfor-
med by a qualified service technician or the Guldmann Service
Team.
5 .02

Safety/service inspections

In accordance with international standard EN/ISO 10535 "Hoist
for the transfer of disabled persons – Requirements and test
methods" an inspection should be performed on the hoist at least
once a year. Guldmann recommends that regular safety/service
inspection is performed at least once a year with regard to the
pattern of usage.
Safety/service inspections of the products must be performed by
a qualified service technician or the Guldmann Service Team.
In connection with the purchase Guldmann may offer a service
agreement for this inspection.
During the safety/service inspection a report must be prepared on
what was checked and replaced. Parts that are worn or defective
must be replaced with new parts from Guldmann. Spare parts
drawings and documentation can be obtained from the manufac-
turer or supplier.
Documentation/checklist regarding safety/service inspection
can be obtained from the manufacturer or supplier .
5 .03

Accessories

Infrared remote control
Guldmann item number 935034
Batteries
MiMH battery 24V/2000mAh, Guldmann item number 550574
Transformer
Transformer, Class I, Guldmann item number 550200
6.00

Classification

CE marking
Read the manual before use
Must not be disposed of as standard household waste,
must be recycled. genbrug.
Class I equipment: Permanent installation with protective ground
The equipment is not suitable for use in the presence of flamma-
ble mixtures.
Examples of serial number label
GH Positioning Lock
GH Positioning Lock
V. Guldmann A/S
Graham Bells Vej 21-23A
DK-8200 Aarhus N xxxxxx
Made in Denmark
yyyy-mm-dd
GS1-128
Transformer Class 1
Type DK-13991
Input 100 - 115V AC 50-60 Hz, 1A
Input 230V AC 50-60 Hz, 0,5A
Input 220V AC 60 Hz, 0,5A
Output 33V AC 2,5A
IP20
Batch No.
year/week
www.guldmann.com
7 .00

EC-Declaration of conformity

The products are manufactured in compliance with the Council
Directive 93/42/EEC of 14 June 1993 – with amendments, as
medical device class 1.
8 .00

Environmental policy statement - V . Guldmann A/S

Guldmann is continuously working towards ensuring that the
company's impact on the environment, locally and globally, is
reduced to a minimum.
It is Guldmann's goal to:
• Comply with the current environmental legislation (e.g. WEEE
and REACH directives)
• Ensure that we, at the widest possible range, use RoHS com-
pliant materials and components
• Ensure that our products do not have an unnecessary nega-
tive impact on the environment regarding use, recirculation or
disposal
• Ensure that our products contribute to a positive working
environment in the places they are utilised
Inspections are made annually by the Department for Nature and
Environment from the Municipality of Aarhus using the Danish
Environmental Protection Act, section 42 as a reference.
xxxxxx
9