Publicidad
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 19)
Serial ATA3 Connectors
Right Angle:
(SATA3_0:
see p.1, No. 13)(Upper)
(SATA3_1:
see p.1, No. 13)(Lower)
(SATA3_2:
see p.1, No. 14)(Upper)
(SATA3_3:
see p.1, No. 14)(Lower)
(SATA3_4:
see p.1, No. 15)(Upper)
(SATA3_5:
see p.1, No. 15)(Lower)
(SATA3_A1:
see p.1, No. 16)(Upper)
(SATA3_A2:
see p.1, No. 16)(Lower)
USB 2.0 Headers
(9-pin USB_1_2)
(see p.1, No. 25)
(9-pin USB_3_4)
(see p.1, No. 24)
30
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Please connect the
chassis power LED and
the chassis speaker to this
header.
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* M2_2, SATA3_0 and SATA3_1
share lanes. If either one of them
is in use, the others will be dis-
abled.
* M2_3, SATA3_4, SATA3_5
and PCIE4 share lanes. If either
one of them is in use, the others
will be disabled.
*To minimize the boot
time, use Intel® Z590
SATA ports (SATA3_0)
for your SSDs.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
Publicidad
