General Safety Instructions - LaserLiner Quadrum OneTouch Manual Del Usuario

Quadrum OneTouch / Quadrum OneTouch Green
Please read the operating instructions as well as the enclosed
!
brochures "Guarantee and additional notices" and "Laser class 3R
safety instructions". Follow the instructions they contain. Safely
keep these documents for future reference.
Fully automatic rotary laser with red or green laser
technology.
– Laser modes: spot, scan, rotary and hand receiver mode
– All functions can be controlled remotely.
– optional SensoLite 310: Laser receiver range up to 300 m radius
– optional SensoLite 410: Laser receiver range up to 400 m radius
– optional SensoMaster 400 (Quadrum red only): Laser receiver range in
excess of 300 m radius. With longer laser receiver unit and millimetre exact
distance reading for laser level.

General safety instructions

Caution: Prior to using the laser, you must read the safety instructions for
laser class 3R thoroughly. Warning signs must not be removed from the laser
measuring device! Do not look directly into the beam. Lasers must be kept
out of reach of children. Never intentionally aim the device at people. This is a
quality laser measuring device and is 100% factory adjusted within the stated
tolerance. For reasons of product liability, we must also draw your attention
to the following: Regularly check the calibration before use, after transport
and after extended periods of storage. We also wish to point out that absolu-
te calibration is only possible in a specialist workshop. Calibration by yourself
is only approximate and the accuracy of the calibration will depend on the
care with which you proceed.
Laser radiation!
Avoid direct exposure
to the eyes.
Laser class 3R
< 5 mW 530 - 670 nm
EN60825-1:2007-10
13
GB