Vitamix XL VM0141 Manual De Instrucciones página 4

Lid Plug
2-Part Lid
Lid Flaps
Blade
Assembly
5.6-litre
Container
Retainer Nut
Drive Socket
Centring Pad
Start/Stop Switch
Variable-Speed or
Programme Dial
Pulse Switch
On/Off Switch: The On/Off switch is located on the right side of the
machine base when facing the machine. The On/Off switch controls the
power to the machine.
Start/Stop Switch: The Start ( )/Stop (
side of the control panel when facing the machine.
Programme Dial (Programmable Model): The programme dial is used to select pre-
programmed blending cycles 1 to 6.
Variable-Speed Dial (Variable-Speed Model): The Variable-Speed Dial selects blade rotation
speeds from 1 to 10 (low to high).
Pulse Switch: The pulse ( ) switch is located on the right side of the control panel when
facing the machine. When the symbol brightens, the power is on. The pulse switch can only
be used when the power is on. The pulse feature will rotate the blades at the setting on the
variable-speed dial.
Container: Millilitres, ounces and cups are clearly marked.
CAUTION: Lids and tampers are not interchangeable between different container styles,
types and sizes.
4
p
a R t S a n d
) switch is located on the left
f
e at u R e S
Tamper
Programming Port
On/Off Switch
Circuit Breaker
2-Part Lid: The 2-part lid is easy to put on and take off, and easy to clean. Always use the lid
and the lid plug during blending.
Snap the lid onto the container and leave in place for a few minutes. Once the lid has been left
on the container, it will be much easier to lock or remove.
Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid plug to use the
tamper or to add ingredients.
Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures
that cannot be processed in a standard blender. Using the tamper maintains circulation by
preventing air pockets from forming during blending.
Circuit Breaker: When the circuit breaker pops out, it does so to protect the motor from
electrical overload. If this occurs, it can be easily reset by gently pushing it back into place.
Automatic Overload Protection: Your Vitamix motor is designed to protect itself from
overheating. If the motor shuts off, turn off the power switch for up to 45 minutes to reset. The
reset time will be extended if high room temperatures exist. To reduce the reset time, unplug
the machine, remove the container and blow air into the centre section of the bottom with a
hair dryer on the cool setting.
Lid Plug
2-Part Lid
Lid Flaps
Blade Assembly
The 2-litre Advance™
Container
Retainer Nut