How To Use "Opener-Tool" To Open Uk Safety Sockets; How To Use Storage Area For "Gs 38 Protective Probe Cap; How To Use Storage Area For "4Mm Ø Test Probe Extension - Beha-Amprobe 2100-Delta Manual Del Usuario

How to Use "Opener-Tool" to Open UK Safety Sockets

To get access to the live and neutral pin of a UK safety socket
you have to release the safety covers first. This could be easily
done by pressing the "Opener-tool" into earth pin of the socket.

How to Use Storage Area for "GS 38 Protective Probe Cap"

1
W
Disconnect the voltage tester completely from any
measuring circuit first.
• Pull out the "GS 38 protective cap" 1 out of the "test
probe protection cover", place onto the test probe tips 2
and push firmly to secure it.
• For removal and storage 3 , please perform the
opposite operation.
How to Use Storage Area for "4mm Ø Test Probe Extension"
4
1/4 turn
5
W
Disconnect the voltage tester completely from any
measuring circuit first.
• To retrieve push the "test probe tip" into the "4mm Ø test
probe extension" 4 and twist right it approx.. ¼ turn 5 .
• Then pull on probe 6 to remove "4mm Ø test probe
extension" and continue twisting until "4mm Ø test probe
extension" is tight 7 .
• For removal please do the opposite way 8 and store it
as shown in last picture.
B
C
6
7
A
2
11
D
3
8