Cut To Edge; Cutting Height - Worx Landroid Manual Del Usuario

EN
1.5 In more extreme weather
In case of a lightning storm, protect Landroid by unplugging the charging base, disconnecting the boundary wire, and making sure
Landroid is not allowed to charge. In the Winter and especially in case of very cold weather and snow, we recommend you store your
Landroid inside. In some countries we offer a Winter servicing of your Landroid so it's ready for the Spring growing season. Contact
your dealer or check online for more details.
1.6 No more grass clippings to collect
Landroid's daily mowing produces very short clippings that don't need to be raked. These clippings are a perfect organic nutrient for
your lawn. Frequent mowing boosts the density of grass blades and effectively prevents the propagation of weeds.

1.7 Cut to edge

Landroid M and L models have a cut to edge feature. The special offset blade gets as close as possible to the border of your lawn,
leaving you little or no trimming to do.

1.8 Cutting Height

Before starting your Landroid for the first time, make sure your grass is no longer than 10cm. If longer, use a regular mower to cut it
before operating Landroid. If you want to drastically shorten the height of your grass, it is recommended that you do so progressively,
by adjusting the cutting height in steps.
1.9 Security & PIN Protection
To prevent unauthorised people from being able to use it, Landroid is protected by a PIN code that you can easily set up.
5