Zepter EDELWASSER Manual De Instrucciones página 19

EN
2) Open the top cover of the product and open the front cover. (Loosening
two screws with a screwdriver, lift off the front cover).
➊
➋
Tip - Don't push the extraction lever with excessive force.
You may damage the product as a result.
3) Separate the fitting connected to the specific filter and then replace the
filter. (Separate the fitting with an appropriate tool).
Tip - Change the filter and connect the fitting and the hose carefully, check
that there is no leakage and drain the first purified water.
4) Close the front cover by fitting into the grooves. Tighten the two screws
on the front cover with a screwdriver. Close the top cover.
Tip - If several filters are being replaced, perform cleaning of three minutes
in between filter replacement.
FILTER NAME
Neo-sense filter
Inno-sense filter
Membrane filter
➊
CLEANSING TIME
30 seconds
3 minutes
3 minutes
COMMENT
Please use Neo-sense filtered water for cleansing
Please use Neo-sense filtered water for cleansing