LEGRAND 882 15 Manual De Instrucciones página 7

Operation
The tabletop control is a scenario switch that can control, via its 6 keys I, II, III, IIII, IIIII,
linked to it during learning (1) .
Pressing a key makes it blink for 5 seconds.
Each key can have either Radio or IR media linked to it. By default all keys control Radio products only.
(1) Learning : procedure that enables to define and save a scenario.
Possible controls using the keys :
Key
I
II
III
IIII
IIIII
The long press applies only when the linked products are dimmers.
*
Procedure for choice of media on a control key :
1 - Press, then release, the Learn key.
The Learn indicator blinks slowly.
2 - Press and hold down for 10 seconds the key whose media you wish to change.
The Learn indicator flashes for 5 seconds, then release the key.
3 - During the 5 seconds, where the Learn indicator flashes, successively press the control key and you will move
from Radio media (Key off) to InfraRed media (Key on).
The saved media will be the one that is active when the Learn indicator stops flashing.
Procedure for viewing the media associated with the different keys :
Press the Learn key, then release.
- The Learn indicator blinks slowly, for 5 seconds the keys are :
a - off if the key is associated with Radio media
b - on if the key is associated with IR media.
Short press Long press (*)
Increasing light level
Scenario
Scenario Increasing light level
Scenario Increasing light level
Decreasing light level
Scenario
Scenario Decreasing light level
Decreasing light level
Scenario
13
14
all of the receivers which were