Instruction For Use; Sleeve Use Instructions; Operation Instructions - Mesis FO-3001 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72

8 INSTRUCTION FOR USE

8.1 Sleeve use instructions

i.
Insert the power plug.
ii.
Connect the hose to sleeve(s) and put it (them) on body.
Leg Garment
In order to avoid knee pain, please don't fold sleeve when use.
― Wear thin clothes and relax naturally.
― Pull the zipper up to the top.
― Face to control panel of the machine, make the air outlets of sleeves
upwards, and connect the connector of hose to the air outlet of machine.
iii.
Turn on the machine, set pressure level and then the treatment time.

8.2 Operation instructions

BEFORE CONNECTING THE POWER CORD AND CARRYING OUT ANY
OPERATION ON THE MACHINE, IT IS ABSOLUTELY NECESSARY TO
REMOVE THE SCREW THAT BLOCKS THE MOTOR OF THE DEVICE.
Note: After receiving the machine , please open
filter cover, and remove the security screw before
use it. The screw is ONLY used for fixing and
protecting the machine from damage during
transportation.
After this important operation:
3)
Please find a flat plane to place the machine.
4)
For installation, it just needs to connect the host connector to the machine and
sleeve, then plug in supply mains.
Step 1 Insert the main plug of power supply
cord into electrical outlet of 220~240V.
Ficheiro No.: FSHF-FO3001
Step 2 Check if the hose has been
connected well to the sleeve(s): if yes,
skip to step 3; if not, please fit the nozzle
of the hose into the outlets sleeve(s).
29
Version: A/1

Publicidad

Tabla de contenido
loading

Tabla de contenido