Cleaning And Mantenance; Cleaning And Care; Maintenance - Mesis FO-3001 Manual De Usuario

9 CLEANING AND MANTENANCE

Fully
comply with the following daily maintenance requirements are necessary, to make sure
your product operate intact and guarantee the product long-term performance and safety.

9.1 Cleaning and care

Not to clean the device during treatment, be sure that the device is turned off
before cleaning the device.
Clean the device with a soft, slightly damp cloth. In case of heavier dirt build-up, you
may also add a mild detergent.
Ensure that no water enter into the machine. If this happens, only use the device after
it is completely dry.
Do not subject the device to moisture or dampness. Do not hold the device under
running water, do not submerge it in water or other liquids.
For reasons of hygiene, each user should use his/her own set of sleeves. Do not
use any organic solvent or aggressive reagent for sleeve cleaning. Do not wash
sleeve with water.
Carefully clean the surface of the sleeves with a damp cloth.

9.2 Maintenance

4) The manufacturer didn't authorize any maintenance agencies abroad. If your device
has any problem, please contact the distributor. The manufacturer will not be
responsible for the results of maintenance or repairs by unauthorized persons.
5) The user must not attempt any repairs to the device or any of its accessories.
Please contact the distributor for repair.
6) Opening of the equipment by unauthorized agencies is not allowed and will
terminate any claim to warranty.
Each product in manufacturing has been passed systematic validation. The
performance is stable and does not need to undertake calibration and validation.
If your product can't reach the expected performance and the basic function has
changed in normal use, please contact the distributor.
Ficheiro No.: FSHF-FO3001
31
Version: A/1