Before Use; After Use - Black and Decker CLM5448PC Manual De Instrucciones

ENGLISH
Use in a dry location only. Do not allow
u
the appliance to become wet.
Do not immerse the appliance in water.
u
Do not open body casing.
u
There are no user serviceable parts
inside.
Do not operate the appliance in
u
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
To reduce the risk of damage to plugs
u
and cords never pull the cable to
remove the plug from a socket.
Before using, always visually inspect
u
to see that the blades, blade bolts and
cutter assembly are not worn or dam-
aged.
Replace worn or damaged blades and
bolts in sets to preserve balance.
In order to avoid a hazard due to inad-
u
vertent resetting of the thermal cut-out,
this appliance must not be supplied
through an external switching device,
such as a timer, or connected to a
circuit that is regularly switched on and
off by the utility.
Never operate the machine while
u
people, especially children, or pets are
nearby.
Keep in mind that the operator or user
u
is responsible for accidents or hazards
occurring to other people or their prop-
erty.

Before use

While operating the machine always
u
wear substantial footwear and long
trousers. Do not operate the ma-
chine when barefoot or wearing open
sandals. Avoid wearing clothing that is
loose fitting or that has hanging cords
or ties.
8
(Original instructions)
Thoroughly inspect the area where the
u
machine is to be used and remove all
objects which can be thrown by the
machine.
Before using, always visually inspect
u
to see that the blade, blade bolt and
the blade assembly are not worn or
damaged. Replace worn or damaged
components in sets to preserve bal-
ance. Replace damaged or unreadable
labels.

After use

When not in use, the appliance should
u
be stored in a dry, well ventilated place
out of the reach of children.
Children should not have access to
u
stored appliances.
When the appliance is stored or trans-
u
ported in a vehicle it should be placed
in the boot or restrained to prevent
movement following sudden changes
in speed or direction.
Inspection and repairs
Before use, check the appliance for
u
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may af-
fect its operation.
Do not use the appliance if any part is
u
damaged or defective.
Have any damaged or defective parts
u
repaired or replaced by an authorised
repair agent.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.
Be careful during adjustment of the
u
mower to prevent entrapment of the
fingers between moving blades/parts
and fixed parts of the machine.