Instructions And Warnings For The End User - Key Automation TURBO 50 Instrucciones Y Advertencias Para Su Instalación Y Uso

6 - INSTRUCTIONS AND WARNINGS FOR THE END USER

Key Automation S.r.l. produces systems for the automation of gates,
garage doors, automatic doors, roller blinds and car-park and road
barriers. However, Key Automation is not the manufacturer of your
complete automation system, which is the outcome of the analysis,
assessment, choice of materials and installation work of your cho-
sen installer. Every automation system is unique, and only your
installer has the experience and skill required to produce a safe,
reliable, durable system tailored to your needs, and above all that
complies with the relevant regulatory standards. Although your au-
tomation system complies with the regulation safety level, this does
not rule out the presence of "residual risk", meaning the possibility
that hazards may occur, usually due to reckless or even incorrect
use. We would therefore like to give you some advice for the correct
use of the system:
be ore usin he au oma ion sys em or he rs ime ha e he
installer explain the potential causes of residual risks to you;
keep he manual or u ure re erence and pass i on o any new
owner of the automation system;
reckless use and misuse o he au oma ion sys em may make i
dangerous: do not operate the automation system with people, ani-
mal or objects within its range of action;
a properly desi ned au oma ion sys em has a hi h le el o sa e y
since its sensor systems prevent it from moving with people or ob-
stacles present so that its operation is always predictable and safe.
However, as a precaution children should not be allowed to play clo-
se to the automation system, and to prevent involuntary activation,
remote controls must not be left within their reach;
as soon as any sys em mal unc ion is no iced disconnec he
electricity supply and perform the manual release procedure. Never
attempt repairs on your own; call in your installation engineer. In
the meantime the door or gate can be operated without automation
once the geared motor has been released using the release key
supplied with the system. In the event of safety devices out of ser-
vice arrange for repairs to the automation immediately;
in he e en o mal unc ions or power ailures while wai in
engineer to come (or for the power to be restored if your system is
not equipped with buffer batteries), the door or gate can be used just
like any non au oma ed ins alla ion
procedure must be carried out;
manual release and opera ion
procedure can only be carried out with the door or gate stationery.
or he
o do his he manual release
rs bear in mind ha he release
ain enance ike any machine your au oma ion sys em needs
regular periodic maintenance to ensure its long life and total safe-
ty. Arrange a periodic maintenance schedule with your installation
engineer. Key Automation recommends that maintenance checks
should be carried out every six months for normal domestic use, but
this interval may vary depending on the level of use. Any inspection,
main enance or repair work mus only be carried ou by uali ed
staff.
Ne er modi y he au oma ion sys em or i s pro rammin and se up
parameters: this is the responsibility of your installation engineer.
es in rou ine main enance and any repairs mus be recorded by
the person who performs them and the documents must be conser-
ved by the system's owner.
he only procedures you are capable o and which you are recom-
mended to perform, are cleaning of the photocell glass and removal
of any leaves or stones that may obstruct the automation system.
o pre en anyone rom ac i a in
tomation system before starting. Clean only with a cloth dipped in
a little water.
At the end of its useful life, the automation system must be disman-
led by uali ed personnel and he ma erials mus be recycled or
disposed of in compliance with the legislation locally in force.
If after some time your remote control seems to have become less
e ec i e or s ops opera in comple ely he ba ery may be a de-
pending on the level of use, this may take from several months up
to more than a year). You will realise this because the transmission
con rma ion li h does no come on or only li h s up or a ery
short time.
a eries con ain pollu an s do no dispose o hem wi h normal wa-
s e bu ollow he me hods speci ed by he local re ula ions
hank you or choosin ey u oma ion
net site www.keyautomation.it for further information.
he a e or door release he au-
r l please isi our n er-
EN
17 17