Seating and Safety Restraints
The heated seat control is located in the lower center of the instrument
panel.
To operate the heated seats:
• Push control to activate.
• Push again to deactivate.
REAR SEATS
To have an unobstructed rear view, you can fold down the second and
third row head restraints. Refer to the Folding down the 2nd row
60/40 seats and bucket seats and 3rd row folding seat (if equipped)
sections later in this chapter.
If needed, when installing some high back child restraints, the head
restraints of the second row seating positions can be removed. Insert a
thin pointed object, such as a paper clip or pushpin, into the hole of
each head restraint guide and while lifting up remove the head restraint.
Store the head restraint in a secure location in the vehicle, such as on
the floor against the rear of the front seats. To re-install the head
restraint, line the posts up in the holes on the seat back with the head
restraint strap facing the outside of the vehicle and push down until the
head restraint locks into place. Lift gently to ensure it is locked into
place.
166
2010 Mountaineer (mnt)
Owners Guide (own2002), 1st Printing
USA (fus)