1. Place palms approximately 2"
Figure 19
2. Product will be dispensed within
3. To receive additional product,
PAGE 3 OF 9
USE AND CLEANING
below dispenser. (See Figure 19)
1 second of sensor activation.
remove hands from below
dispenser and repeat Step 1.
TROUBLESHOOTING
OPERATING ISSUE
No dispense. Motor does not run.
No dispense. Motor runs.
TO CLEAN
• Clean exterior surfaces of the dispenser using warm
water and mild soap.
NOTE: Do not use abrasive cleaners.
• Dry with a soft cloth.
RECOMMENDATIONS
Hands are not directly beneath
sensor.
No refill is loaded.
Incorrect refill is loaded.
Batteries are not loaded, or are
loaded incorrectly.
Refill is empty or is loaded
improperly.
Refill pump is not primed.
1-800-295-5510
uline.com
0821 IH-1585