Mopar 82212695 Manual De Instrucciones página 3

12. Position the lower shroud (2) over the tilt lever and
onto the column (5).
13. Install the screw attaching the lower shroud (2) to the
column (5).
14. Install the upper shroud (1) over the lower shroud (2),
clipping the shrouds to one another.
15. Install the two screws (4) attaching the upper shroud
(1) to the lower shroud (2).
16. Depress the three mounting clips (2) to disengage the
TIPM (1) from its mounting bracket and lift/tilt the TIPM
(1) up for access to the connectors on the bottom.
NOTE: Connector C­11 may be labeled "L" on the
TIPM.
17. Release the lock and disconnect the C­11 connector
(3).
18. Using a small pick (1) or equivalent, release the Ter­
minal Position Assurance (TPA) lock (2) on the face of
the C­11 connector (3).
Jan 17, 2011
www.mopar.com
3
K6861209