ResMed S9 Manual Del Usuario página 3

English
Thank you for choosing the S9 Wireless module. Used with ResMed S9 devices
within the home environment, the S9 Wireless module transmits therapy data from
your device to your healthcare professional.
Please read the entire manual before using this device.
The S9 Wireless module:
• sends patient therapy data to a centralized server for later access by your
healthcare professional via the internet; and
• receives settings changes to your S9 device based on instructions sent by your
healthcare professional.
S9 Wireless module
Refer to illustration A.
1. Module connector
2. Module clip
LED status light
3.
4. Release button
Setup
1. Disconnect the S9 device from the power outlet.
Align the S9 Wireless module clips with their corresponding sockets and push
2.
the Wireless module onto the S9 device [see illustrations C and D]. Ensure the
module clips click into place.
3. Reconnect the S9 device to the power outlet. The LED status light on the S9
Wireless module will blink slowly (1 second on, 1 second off).
After initializing, the S9 device displays the signal strength and network information.
This information displays 5 times, for 30 seconds each time. If your healthcare
professional has activated your module, the LED status light then stops blinking and
Rear panel of S9 device
Refer to illustration B.
1. DC Power inlet
2. Module clip socket
Module/Adapter port
3.
4. SD card slot
1
English