Monster Power Signature PRO AVS2000 Manual Del Propietário página 15

14. Outlet Programming: Determines the delay time associated with the switched outlets.
15. Digital "Output/Input Voltage" Meter: Indicates Output or Input voltage.
16. Digital "Voltage Correction" Meter: Indicates the amount of voltage being increased or decreased
in an effort to maintain a consistent 120 volts.
17. Digital "Current Usage" Meter: Indicates amperage draw.
18. "Input Voltage and Display Dimmer" Button: Indicates output voltage meter (press and release).
Adjusts the brightness of the digital meters (press and hold).
19. "Sequential Power ON/OFF" Switch: Once the Automatic Voltage Stabilizer is plugged into a properly
grounded 120 volts (nominal) outlet, pressing this button will provide AC power to the components plugged
into the Automatic Voltage Stabilizer's Switched (Timed) outlets. Pressing this button again will turn off
the Switched (Timed) outlets. (Unswitched outlets remain on at all times.)
20. LED Indicator Switch: Turns outlet indicator LEDs on or off.
21. Remote "DC In" Control: Allows you to automatically turn on the Signature PRO AVS 2000 via the
Remote "DC Out" on another component, such as an AV receiver.
22. Remote "DC Out" Control: Allows you to turn a remote device on automatically when
the Signature PRO AVS 2000 is turned on.
23. Ground Screw: Provides a ground reference point for any ungrounded component.
24. Resettable 20-Amp Circuit Breaker: Protects the Signature PRO AVS 2000 from continuous power overload.
25. Ultra-High Current Signature Powerline
AC power cord specially designed to maximize power transfer.
400 AC Power Cable: A 20 Amp High density triple shielded
™
7