Configuration Via Bluetooth (Ble) - Cadel EASY CONNECT PLUS Mithos Plus 14 Manual De Instalacion Y Uso

EN
Fig. 19 - Dropdown menu Fig. 20 - Disable wifi
• "CONFIGURATION COMPLETE" will be displayed (see Fig. 18).
• Press the arrow at the top left (see Fig. 18).
• Tap the dropdown menu of your smartphone (see Fig. 19).
• Select the home wifi network and deselect "NAVEL_XXXXXX" (see Fig. 20).
• Go back to the "EASY CONNECT PLUS" application and disconnect from wifi.
• Select "MY STOVES" and select the active stove you have just set up.
Note: when the "plug" appears next to the added stove, it means that the stove is connected.
To access the stove controls, press the added and connected stove's name and start using the application.
5.2.2

CONFIGURATION VIA BLUETOOTH (BLE)

• On the "CONFIGURATION" screen select "CONFIGURE VIA BLUETOOTH" (see Fig. 21).
• The "CONNECTING..." screen appears (see Fig. 22). This screen only appears on the first connection of the day.
• The device searches for a connection and "STATUS CHECK" appears on the screen (see Fig. 23).
Fig. 21 - Bluetooth setup 1 Fig. 22 - Bluetooth setup 2 Fig. 23 - Bluetooth setup 3
• Select the home WiFi network (see Fig. 24). Enter the home WiFi password, if prompted.
• If the connection is successful, "THE DEVICE IS CONNECTED" appears (see Fig. 25).
• The device is connected to the stove and is ready to be used.
61
EN - EASY CONNECT PLUS