Chronos Menu - Cadel EASY CONNECT PLUS Mithos Plus 14 Manual De Instalacion Y Uso

POWER
T. AMBIENT
VENTILATION
DUCTING
(if present)
STORAGE T.
(only for hydro
models)
BOILER H2O
SETTING
(only for hydro
models)
PUFFER T.
(only for hydro
models)
9

CHRONOS MENU

The programmable thermostat allows the stove to switch on or off at certain times of the day.
You can set up to 6 stove operating programs.
The variables that can be set are:
• the intended days of the week
• the product switch-on and switch-off time.
Press ACTIVATE after setting the programs (see Fig. 30).
Refer to the product manual for additional operating details.
EN - EASY CONNECT PLUS
EN
This function allows you to set the power of the flame from a minimum of 1 to a maximum
of 5. The power levels correspond to the maximum level at which the product can work
to reach the desired temperature, and consequently correspond to a different fuel con-
sumption value. By setting the power on 5, the product heats the room in a shorter time.
Use the + or - buttons to increase or decrease the POWER. Use the SAVE button to confirm
the selected power.
If the product is used with the room probe, this function is used to set the temperature to
be reached in the room in which the stove is installed, from a minimum of 5°C to a maxi-
mum of 35°C. When this condition is met, the stove setting is equivalent to the minimum
consumption values (the flame and hot air fan speed at minimum), and then returns to the
set values when the room temperature drops below the set threshold.
Use the + or - buttons to increase or decrease the temperature. Use the SAVE button to
confirm the selected temperature.
In the case of a ventilated product, the ventilation speeds that can be set are 5 plus one
automatic mode.
After pressing the relative button to select the speed, rotate the ring nut to increase or
decrease the ventilation power. Besides the 5th speed, there is an additional optional
selection called AUTO. This function allows the ventilation speed to be "linked" to the flame
power with a maximum of V3. With this option selected, the stove will autonomously
select the fan speed, based on the flame power up to a maximum of V3 (P1=V1; P2=V2;
P3=V3; P4=V3; P5=V3) to prevent noise.
Use the + or - buttons to change the ventilation speed. Use the SAVE button to confirm the
set ventilation.
Value set to reach the water temperature in the storage tank.
Value set to reach the water temperature in the boiler.
Value set to reach the water temperature in the puffer.
65