Using the Automix cartridge
D
E
F
Inserting the cartridge
1. Push up the lever [A] at the back of the
dispensing gun and pull back the slide [B]
completely.
2. Lift up the plastic lever [C], insert the
cartridge and lock it using the plastic lever
[C].
Note: Make sure that the notches on the cartridge
line up with those on the dispensing gun.
12
C
A
G
Attaching a mixing tip
1. Remove the cartridge cap [D] or used mixing
tip after turning it 90° counterclockwise, and
discard it.
2. Attach a new mixing tip [E].
B
Note: Make sure that the notches on the mixing
tip line up with those on the cartridge.
3. Turn the mixing tip clockwise 90° to lock it.
Applying material
When using a cartridge for the first time,
squeeze out approx. a pea-sized amount of
material and discard it.
Mix the material in the mixing tip using the
lever [G] on the dispensing gun and apply
directly.
Note: After application, leave the used mixing
tip on the cartridge as a seal!