Trapezoidal Desktop Extension - Steelcase Bivi Manual De Instrucciones

Expanding the workspace

Trapezoidal desktop extension

The trapezoidal desktop extension will be mounted on a dual workstation at standing height.
Requirement: A desktop or an element (e.g. arch attachment, storage compartment) must be installed on
the opposite side.
This requires the following components:
• Desktop extension
• Desktop support: 1 mounting rail, 2 mounting brackets, thumb screws / nuts
Trapezoidal desktop extension, permissible attachment
1 Trapezoidal desktop extension
A trapezoidal desktop extension cannot be mounted in the following configurations:
• Dual workstation, seating height (see Figure 13, left).
Reason: The desktop extension is on each side about 5 cm narrower than the depth of the two desktops.
Risk of impact!
Single workstation (see Figure 13, right).
•
Reason: The desktop extension protrudes on both sides beyond the desktop depth. Risk of impact!
Trapezoidal desktop extension, impermissible attachment
Bivi Manual -en- 2019 Page 24 of 53