Sauder Palladia 411626 Manual Del Usuario página 11

Step 7
Fasten the LEFT END (B) to the LEFT MOLDING (S).
å
Tighten two TWIST-LOCK® FASTENERS.
Push four METAL PINS (1R) into the edges of the UPPER
å
UPRIGHT (D). Push two METAL PINS in the UPRIGHT into
the holes in the TOP (E2).
S u r
T W
F A S
www.sauder.com/services
B
i t h
e w
K ®
f a c
L O C
I S T -
E R S
T E N
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking the
FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
S
Finished edge
D
411626
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
®
FASTENER
Dowel end
E2
1R
Page 11